error 406 when posting
error 406 when posting
when i try to post to this thread http://www.the510realm.com/viewtopic.php?f=32&t=27859
i am now getting error 406
anybody know what this is about?
Not Acceptable
An appropriate representation of the requested resource /posting.php could not be found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
i am now getting error 406
anybody know what this is about?
Not Acceptable
An appropriate representation of the requested resource /posting.php could not be found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Re: error 406 when posting
I was able to post on that thread successfully.
Finished is better than perfect......
Re: error 406 when posting
im getting the error too
Edit: sure...... so I can post here?
Edit: can I post the body of the text meant for my build thread here?
I don't know exactly what kind of nozzle I have. it came with the Snow Performance kit.
I was running a white/purple 225ml/min @ 150psi jet, on a single dgav (keep in mind that I don't know what Im doing). it was a good kick in the pants @ 3400rpm with 8 in vacuum and 20 percent pump injection pressure. as the rpm increased with lowering vacuum the pump delivered more pressure via a controller. a link to the manual for the kit and the vc-a10 controllerhttp://www.jegs.com/InstallationInstruc ... 0020MC.pdf
assuming i was somewhere in the park with the 225ml/min jet(manual says: 175ml nozzle is recommended for 250 - 300 RWDHP) If I was to split it up and feed each of the 4 runners (before or after the butterfly?) I would need 4X 55ml/min jet(probably smaller like 4x30ml or 2x60ml). the smallest jet offered by snow (according to my manual) is 60ml/min.
yup just had to omit the percent symbol
Edit: sure...... so I can post here?
Edit: can I post the body of the text meant for my build thread here?
I don't know exactly what kind of nozzle I have. it came with the Snow Performance kit.
I was running a white/purple 225ml/min @ 150psi jet, on a single dgav (keep in mind that I don't know what Im doing). it was a good kick in the pants @ 3400rpm with 8 in vacuum and 20 percent pump injection pressure. as the rpm increased with lowering vacuum the pump delivered more pressure via a controller. a link to the manual for the kit and the vc-a10 controllerhttp://www.jegs.com/InstallationInstruc ... 0020MC.pdf
assuming i was somewhere in the park with the 225ml/min jet(manual says: 175ml nozzle is recommended for 250 - 300 RWDHP) If I was to split it up and feed each of the 4 runners (before or after the butterfly?) I would need 4X 55ml/min jet(probably smaller like 4x30ml or 2x60ml). the smallest jet offered by snow (according to my manual) is 60ml/min.
yup just had to omit the percent symbol
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
Re: error 406 when posting
cant even make a post with only a percent symbol
! @ # $ ^ & * ( ) _ + : " ? > <
yup everything but percent
! @ # $ ^ & * ( ) _ + : " ? > <
yup everything but percent
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!
Re: error 406 when posting
yep that was it, good troubleshooting RMS!
Re: error 406 when posting
Nice find guys! I'll see if I can resolve that!
Cheers
Cheers
Re: error 406 when posting
I got the same error tonight responding to the Nurburgring thread..
For some reason my machine has been picky this past week only on our site. I dumped all the cookies and cleared the memory last week as part of an IT clean up - not sure if this had an effect. You’d think it would help...
Anyways, hopefully it all gets better.
Byron
For some reason my machine has been picky this past week only on our site. I dumped all the cookies and cleared the memory last week as part of an IT clean up - not sure if this had an effect. You’d think it would help...
Anyways, hopefully it all gets better.
Byron
Love people and use things,
because the opposite never works.
because the opposite never works.
Re: error 406 when posting
The percent symbol is still causing this error. Should have checked here first, but I logged out, logged in, tried another browser, etc. FWIW.
Because when you spend a silly amount of money on a silly, trivial thing that will help you not one jot, you are demonstrating that you have a soul and a heart and that you are the sort of person who has no time for Which? magazine. – Jeremy Clarkson
Re: error 406 when posting
This percent symbol trapped me the other day as well - closed IE, ended up rebooting the machine - still no avail. Then I remembered doing this a couple years ago.... not before almost a fit not being able to figure out the issue.
Byron
Byron
Love people and use things,
because the opposite never works.
because the opposite never works.
Re: error 406 when posting
Because when you spend a silly amount of money on a silly, trivial thing that will help you not one jot, you are demonstrating that you have a soul and a heart and that you are the sort of person who has no time for Which? magazine. – Jeremy Clarkson
Re: error 406 when posting
Ohhhyeah - fixed
Love people and use things,
because the opposite never works.
because the opposite never works.