Page 1 of 2
Post pics of your dime and your wheel and tire mesurments
Posted: 07 Jan 2006 18:31
by kemmer
I am looking to make a good reference guide to buying wheels and tires for the 510s. So list wheel and tire size and offset. As well tell if you have flairs and about how much it is lowered if at all. If you can, post a pic or a link to a pic. Make and model to tire and wheels would be cool too.
Thanks
Jon
RE: Post pics of your dime and your wheel and tire mesurment
Posted: 07 Jan 2006 22:00
by bertvorgon
My car has 15" Riken wheels, zero offset, with Yokohama 032r's, 205 X 50 series, in the "S" compound. Hard to say how much it has been lowered, but, the front airdam, with those 23" tall tires, is about 5" off the ground. On my race tires, the car's airdam has about 3" of clearance.
Posted: 07 Jan 2006 22:32
by heirfaus
Don't know what year, but they are the stock wheels from a mitsubishi starion. Not sure of the offset either. all I know is that you have to grind the inner ring of the mounting area a little to make them fit. and it's fairly tight, but with the ZX struts and 195/60/14 they fit snuggly. was lowered about 1 inch.
Posted: 08 Jan 2006 07:59
by froggie510
Posted: 08 Jan 2006 10:20
by fvtenfanatic
mine are 14 x 6 12mm offset superlites from australia
car has 280 struts and s.t. springs
Posted: 08 Jan 2006 10:22
by fvtenfanatic
mine are 14 x 6 12mm offset superlites from australia
car has 280 struts and s.t. springs
A few of mine...
Posted: 08 Jan 2006 10:47
by Byron510
Some more ideas...
Posted: 08 Jan 2006 11:07
by vgwagon
1985 300zx na 15x6.5 +30mm
P225/50HR15 BFGoodrich euro t/a. front needed 10mm spacer on my 200sx struts, rear on a sedan would need rear fender lips rolled and one side would need a 5mm spacer for tires this big.....these wheels will fit no problem with 195/50r15.
Posted: 08 Jan 2006 11:09
by Byron510
The wagons....
Posted: 08 Jan 2006 11:19
by Byron510
The rally car incarnations.....
Posted: 08 Jan 2006 11:21
by vgwagon
And here are 1992 300zx na 16x7.5 wheels +45 offset wrapped with 205/50r16 kelly evo-z tires....12mm spacer on front and rear will need the same on a sedan...oh and a 5-lug conversion is also needed for these. 1980 200sx struts w/1986 turbo 300zx front hubs
Old Style Mags Also.
Posted: 08 Jan 2006 12:27
by jason
1972 Stock 4 door, including suspension.
With 14x5.5" Western Bullets (? Offset) and 175/65 R14 Falken 512's
With 14x6" Enkie Compomotives (? Offset) and 195/60 R14 Falken Azenis.
Jason
Posted: 08 Jan 2006 19:06
by jimandre
this one is low ,200 struts shortened, specialty springs shortened, so no speed bumps here with the 13x7 libras polished and painted
Will these fit in stock fenders
Posted: 09 Jan 2006 21:25
by kemmer
Will these fit in stock fenders with it dropped? 14” x 7”
http://www.konigwheels.com/catalog_prod ... &ss_id=430
RE: Will these fit in stock fenders
Posted: 09 Jan 2006 22:27
by shwyn510
i dont think they will since they only make 14x7 rewinds in -9 offset. the 0 offset 15x7 cuts really close to the fender