New potential products for 510's and Datsun from Mattndew76
- bertvorgon
- Supporter
- Posts: 12032
- Joined: 04 Aug 2003 20:45
- Location: White Rock, B.C. Canada
Re: New potential products for 510's and Datsun from Mattndew76
I wouldn't mind going to Canby this year, been a few years since last there.
"Racing makes heroin addiction look like a vague wish for something salty" - Peter Egan
Keith Law
1973 2 Door Slalom/hill climb/road race / canyon carver /Giant Killer 510
1971 Vintage 13' BOLER trailer
Keith Law
1973 2 Door Slalom/hill climb/road race / canyon carver /Giant Killer 510
1971 Vintage 13' BOLER trailer
- Mattndew76
- Supporter
- Posts: 1609
- Joined: 23 Jul 2006 18:26
- Location: Creswell, Oregon.
Re: New potential products for 510's and Datsun from Mattndew76
I will look for you if you decide to come to the event.
An Idea doesn't work unless you do.
- Mattndew76
- Supporter
- Posts: 1609
- Joined: 23 Jul 2006 18:26
- Location: Creswell, Oregon.
Re: New potential products for 510's and Datsun from Mattndew76
Solo here is the sample of the 510 pedal.
- Attachments
-
- accelerator pedal
- accel pedal 510-2.JPG (24.75 KiB) Viewed 4341 times
-
- accelerator pedal
- accel pedal 510.JPG (26.4 KiB) Viewed 4341 times
An Idea doesn't work unless you do.
- eastbaysolo_73
- Supporter
- Posts: 705
- Joined: 18 May 2014 09:28
- Location: Northern California
Re: New potential products for 510's and Datsun from Mattndew76
Looks bad ass man! Is going to have any groves on the pedal its self or will it be just a smooth piece?
1970 2 door sr20det cookie cutter build
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
- Mattndew76
- Supporter
- Posts: 1609
- Joined: 23 Jul 2006 18:26
- Location: Creswell, Oregon.
Re: New potential products for 510's and Datsun from Mattndew76
I can mill a knurl patch on the face or groove it.
An Idea doesn't work unless you do.
- eastbaysolo_73
- Supporter
- Posts: 705
- Joined: 18 May 2014 09:28
- Location: Northern California
Re: New potential products for 510's and Datsun from Mattndew76
sweet sound good
1970 2 door sr20det cookie cutter build
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
- Mattndew76
- Supporter
- Posts: 1609
- Joined: 23 Jul 2006 18:26
- Location: Creswell, Oregon.
Re: New potential products for 510's and Datsun from Mattndew76
Mustache Bar.
- Attachments
-
- R160-R180 Mustache.JPG (256.58 KiB) Viewed 4308 times
An Idea doesn't work unless you do.
Re: New potential products for 510's and Datsun from Mattndew76
Bad-ass as always.
Because when you spend a silly amount of money on a silly, trivial thing that will help you not one jot, you are demonstrating that you have a soul and a heart and that you are the sort of person who has no time for Which? magazine. – Jeremy Clarkson
- Mattndew76
- Supporter
- Posts: 1609
- Joined: 23 Jul 2006 18:26
- Location: Creswell, Oregon.
Re: New potential products for 510's and Datsun from Mattndew76
Thank you
An Idea doesn't work unless you do.
Re: New potential products for 510's and Datsun from Mattndew76
Hey Matt,
Isn't Mario's bar kinda like your design? You should try designing one for the Z car crowd.
Isn't Mario's bar kinda like your design? You should try designing one for the Z car crowd.
- Mattndew76
- Supporter
- Posts: 1609
- Joined: 23 Jul 2006 18:26
- Location: Creswell, Oregon.
Re: New potential products for 510's and Datsun from Mattndew76
Shoot. I haven't seen Mario's bar yet.
I think the Z bar is longer than 21" isnt it? That's longer than my X axis travel
I think the Z bar is longer than 21" isnt it? That's longer than my X axis travel
An Idea doesn't work unless you do.
Re: New potential products for 510's and Datsun from Mattndew76
I wanted a TSR moustache bar in the worst way a while back.Cmac wrote:New TSR rear diff mount for the R200 not installed on my car I kinda like the steel one because its made by hand.
'72 2 door KA project | S14 Silvia RB25DET | S14 RB26DETT (sold) | '90 Audi 90Q20V (sold)
Re: New potential products for 510's and Datsun from Mattndew76
I am not sure about the length, but it's wide. You could get creative with some jigging and machine one half at a time. The Z car ones that I have seen are made in three pieces, the bar itself and the ends, just like the one that I made for my project. But, a one piece would be different and sellable.Mattndew76 wrote:Shoot. I haven't seen Mario's bar yet.
I think the Z bar is longer than 21" isnt it? That's longer than my X axis travel
Jordan, thanking for finding that picture of Mario's bar, I know that I had seen it before on here. I sure that Mario's bar is only for a R200, I don't think he has one for the R160/180.
Re: New potential products for 510's and Datsun from Mattndew76
R160/R180/R200 all use the same mounting points on the 510 so they should all be the same absolute length. It's just the forward/aft placement of the diff cover and vertical height of the mounting holes that changes.
I don't think Mario does R160/180 stuff. The billet R200 bars are fully polished prior to anodizing so that's why they pop so nicely once coloured.
I don't think Mario does R160/180 stuff. The billet R200 bars are fully polished prior to anodizing so that's why they pop so nicely once coloured.
'72 2 door KA project | S14 Silvia RB25DET | S14 RB26DETT (sold) | '90 Audi 90Q20V (sold)
- Mattndew76
- Supporter
- Posts: 1609
- Joined: 23 Jul 2006 18:26
- Location: Creswell, Oregon.
Re: New potential products for 510's and Datsun from Mattndew76
I will have to dig in the Z bar and see what I can come up with.
I picked up a great R160 donation from OutThere yesterday. So now I can finalize al the mustache bars for the 510's. My part look is ugly enough that I don't think any conflict should arise from TSR.
Pics of complete parts coming soon.
I picked up a great R160 donation from OutThere yesterday. So now I can finalize al the mustache bars for the 510's. My part look is ugly enough that I don't think any conflict should arise from TSR.
Pics of complete parts coming soon.
An Idea doesn't work unless you do.