EGR taper plug?

[Edm620]

Apparently Nissan made a plug for the EGR that fits a few models, pn is 14052-21R00. Anyone know if this is a currently available part? I'm not having luck doing a web search.

[datzenmike]

This appears to be for plugging the EGR tube hole on the exhaust manifold... for countries not requiring EGR?

Used on '84 and up S12 CA20 and '86- CA20E on the Stanza exhaust manifolds. Also the 2000 Maxima VG33DE exhaust manifold.

[Edm620]

EGR Taper Plug

IMG_5955.JPG (35.05 KiB) Viewed 2007 times

Yes that is correct. Also on the KA.

It is a limited availability item, none found locally to me so I ordered one from US supplier - more cost in shipping than the part.
Apple (?) Nissan in Richmond(?) apparently has one in stock if anyone looking for such, and a few in Ontario.

[RMS]

would that be a BSP fitting ?

[datzenmike]

I have no EGR on my L20B and the TVV was broken and unused so I deleted it and used a core plug from a KA intake I had laying around. They are on all kinds of later engines in all sizes and not hard to find. Take an Allen set with you.

[510rob]

JIS Tapered Pipe spec is the same as BSPT spec

[Edm620]

Not the same thing, this is a much larger diameter and machine thread.

IMG_5955 (2).JPG (44.44 KiB) Viewed 1951 times

The right part fits very nicely.

IMG_5960 small.jpg (117.45 KiB) Viewed 1951 times