Bump Steer Spacers

Post your forsale and wanted ads
Post Reply
User avatar
MarkReidHRC
Supporter
Posts: 124
Joined: 08 Jan 2018 10:32
Location: Langley BC

Bump Steer Spacers

Post by MarkReidHRC »

ISO a set of Bump Steer Spacers.
If all else fails... try again
Top
User avatar
Matt#2
Posts: 82
Joined: 17 Sep 2003 18:17
Location: Coquitlam, BC

Re: Bump Steer Spacers

Post by Matt#2 »

I purchased these about a month ago, no complaints at all.

https://www.ebay.ca/itm/Datsun-510-280Z ... 2749.l2649

He's located in North Van
Top
datzenmike
Supporter
Posts: 6084
Joined: 24 May 2006 12:40
Location: Van. Isle.

Re: Bump Steer Spacers

Post by datzenmike »

Image

I made my own for free out of scrap 1/4". Every lowering is different and there is no set bump steer correction. To reduce to zero you would have to do some measuring to figure out how thick you need to get the steering tie rod back to horizontal. I think I made enough to make 3/4" stacked per side. Turned out I only needed 1/2" or two and slightly longer bolts. Bolts were probably $4 each I forget.

Image
"Nissan 'shit the bed' when they made these, plain and simple." McShagger510 on flattop SUs
Top
Post Reply

Return to “Classifieds”