Bunch of parts FS - Sold

[msaunders]

Looking to clean out the shop of the rest of my 510 stuff - mostly stock parts that have been kicking around for years after parting a car, building a KA turbo car, etc. I'll update the list as I find more stuff. Located in Osoyoos BC, local pickup strongly preferred. Could meet in Okanagan area or possibly lower mainland. Would prefer if somebody took everything. Big discount for the whole lot - someone could make some bucks piecing out bits. I just don’t have the time these days. If photos required of anything let me know.

SOLD

- Rear Xmember, from a 65k orig car, stock unmodified, exc. condition. $150
- Front 1" and rear 5/8"? sway bars. I believe these are Tilton. $100
- '72 steering column $50
- Dual SU choke cable $40
- x2 Eyebrow trims, usable cond. $40
- x2 Headlight buckets w/trims, good. $40
- Entire stock steering setup $50
- Halfshafts
- Rear control arms
- Seat hardware, sliders
- Seatbelts
- Wiper linkages, Hood linkages, door handles
- Hinges
- Whole bunch of L16 stuff, free
- Entire wiring harness from a '72 w/fuse block
- KA24DE oil pan, injectors, cast T3 turbo manifold, Stock KA shifter w/new bushings, various stock KA parts
- ‘72 Dash plastics, bezel, rr. ashtray
- Heater core/blower
- Gas tank filler stuff
- Ignition switch w/key
- Turn signal switch
- Trans x members
- Delrin ball and cup TC rods
- etc


-edit, some pics of a few of the parts added

[iceman510]

sending message.

[Colbino]

Interested in the dual SU choke cable. Condition/Pics?

[SteveEdmonton]

Yes, if this dual choke cable works out for you, Colby, that's a great deal.

If not, I'm using a cable from a '72 TR6 that I got from Moss Motors. Works and looks great. It was about twice the price of this one, though, ten years ago!

[yenpit]

Anybody looking at buying the TR6 cable, you need the SOLID CORE cable Triumph #UKC2121 (Moss can cross reference to their #)

TJ

[Colbino]

Thanks for the TR6 idea, fellas. The 311's also have one that could work. Either way I'd need the mounting bracket though.

[ASHTC510]

I'm interested in front light buckets. Just the drivers side.

[Fred_L-P]

PM sent

[ASHTC510]

Light assembly drivers side

[1969Dime]

I would be interested in the gas filler assembly you've listed, but don't see a price listed. Is shipping possible? I am in Union City, CA. 94587. Thanks for your time. Steve Robinson

[1969Dime]

Also interested in the fuse box, if it is available separately? Thanks again. Steve

[1969Dime]

on the gas filler assembly, I actually only need the lower hose that connects to the fuel tank and the metal fill pipe, and its clamps, if available separately- Thanks again.

[msaunders]

Replied to a bunch of PMs. As stated in the ad, no shipping at this time - sorry.

[yenpit]

That "complete" car harness should work on a LATE 1970-1972 SEDANS with the round gauges (not early 1970 Sedan round gauge, not the 1973 Sedan round gauge & NOT the Wagons!), but I would also strongly suggest buying YOUR YEAR hand drawn wiring schematic from Paolo (paolo@cedarcomm.com), cuz the aftermarket schematics ie Haynes, Chiltons, Clymers etc are NOT correct for USA spec cars! Good luck with the sales!

[andrew.lori]

What Yenpit said....