Vg30-33 question

Problems, ideas and comments specific to engine swaps.
Post Reply
User avatar
lovememydatsun
Posts: 24
Joined: 24 Jan 2013 08:50
Location: Montebello ca

Vg30-33 question

Post by lovememydatsun »

After installing jet stage 2 cams and cam gears, porting and polishing the heads, installing headers around how much hp would the engine have on the wheels? Any people with dyno sheets they can post up?
User avatar
Hakosuka510
Posts: 73
Joined: 10 Oct 2014 15:22
Location: San Antonio, Texas

Re: Vg30-33 question

Post by Hakosuka510 »

It's difficult to throw out a horsepower estimate without some specifics...
VG30E (single cam heads) or VG30DE (dual cam heads)?
What are the actual specs (lift & duration) of the cams? Everyone's "stage" scale is different...
If it's a DE, which intake manifold are you using?
Port work is great, but polishing of head ports does almost nothing (and can actually be worse), unless you mean cleaning up extreme roughness of the initial port work.
Stock ECU, stock injectors, stock compression?
User avatar
okayfine
Supporter
Posts: 14154
Joined: 12 Nov 2007 23:02
Location: Newbury Park, CA

Re: Vg30-33 question

Post by okayfine »

Exhaust?

And you'll need to decide on your displacement. The 33 gives a nice bump to output.
Because when you spend a silly amount of money on a silly, trivial thing that will help you not one jot, you are demonstrating that you have a soul and a heart and that you are the sort of person who has no time for Which? magazine. – Jeremy Clarkson
Post Reply