Dust cover for clutch on fire wall.

[eastbaysolo_73]

Does anyone know where I can attain this dust cover boot for the clutch pedal to fire wall. This is on my buddy's right hand drive US sedan conversion. I noticed on my car I don't have the cover and would like to have one.

Thanks in advance

92484762_633905644128166_4790490166999384064_n by v p, on Flickr

[bertvorgon]

Yes, that boot is stock.

Make sure all the slop is out of the clevis pin, makes the clutch feel way more positive.

[datzenmike]

Maybe on the Coupe. All my info shows a rounded rubber boot. The slave has that style of bellows boot ... maybe it will fit the master also?.

[eastbaysolo_73]

Yes, that boot is stock.

Make sure all the slop is out of the clevis pin, makes the clutch feel way more positive.

Will do.. Thanks, I actually just ordered some fluid to fill the clutch reservoir. Gonna fill the transmission also now that the driveshaft is mounted. Photos in my build thread.

[eastbaysolo_73]

Maybe on the Coupe. All my info shows a rounded rubber boot. The slave has that style of bellows boot ... maybe it will fit the master also?.

Well I talk to Troy Ermish and he said most the US sedans he's dealt with dont have them. I can get a new boot if I replace that part with a new clutch master cylinder deal. For now it can wait because I know this part still works well.

[datzenmike]

All brake boosters have a bellows style but 1.75" and a gap around the push rod. They all have this gap so not intended to seal out perfectly. So close, I thought I had the answer.

[eastbaysolo_73]

All brake boosters have a bellows style but 1.75" and a gap around the push rod. They all have this gap so not intended to seal out perfectly. So close, I thought I had the answer.

Right on man..