better red than dead

View and post your 510 project(s)
User avatar
JordanTr
Posts: 861
Joined: 20 Feb 2013 22:27
Location: Langley, BC, Canada

Re: better red than dead

Post by JordanTr » 23 Apr 2018 22:01

6206 is the bearing #. Motion sells lots of those as they are super common in electric motors and other things like 510s!
Jordan | '72 2 door KA project | '94 240sx RB26DETT | '97 Silvia RB25DET | '90 Audi 90 Quattro 20V (DD)

User avatar
RMS
Supporter
Posts: 1693
Joined: 12 Oct 2009 01:03
Location: Richmond BC Canada

Re: better red than dead

Post by RMS » 24 Apr 2018 08:15

sweet! thanks guys.
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!

User avatar
RMS
Supporter
Posts: 1693
Joined: 12 Oct 2009 01:03
Location: Richmond BC Canada

Re: better red than dead

Post by RMS » 30 Jan 2019 08:35

picked up a set of led harly headlights H5001, cut the buckets up to fit, plugged them in pulled the sw and nothing ..... :?

i went back and reread pg43 of 2.3L of fun http://www.the510realm.com/viewtopic.ph ... &start=630 searched for a diagram on the web.Image
swapped lo and ground and had feedback on low, dimly lighting up the inner highs. no matter how I swapped the wires could I get all the lights to work.

then I noticed that the 510 has a funny ground thing going on.

can someone please help me get all 4 eyes working she heads to work @ 2pm .... if she drive's 6inches of rust to work.... i fear she will be asking for a bigger motor when she gets home. :P
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!

User avatar
RMS
Supporter
Posts: 1693
Joined: 12 Oct 2009 01:03
Location: Richmond BC Canada

Re: better red than dead

Post by RMS » 31 Jan 2019 14:03

I probed around with a test light and noticed a positive feed to both sides of the high beam socket (inner lights) when the lows are on. :?

grabbed the new diagram I got from Bert and it looks like the hi - is + till the relay is tripped. Image
two_68_510s wrote:I guess our donkeys are quicker then your sled dogs!

Post Reply