Exhaust manifolds (ONE left)

Post your forsale and wanted ads
Post Reply
User avatar
SteveEdmonton
Supporter
Posts: 580
Joined: 27 Aug 2010 13:20
Location: Edmonton, AB

Exhaust manifolds (ONE left)

Post by SteveEdmonton »

Two stock manifolds in very good condition. Both are the good "4-into-2" design with full separation between #2 and #3 throughout the length of the passages.

#1 is shown in the first 3 pictures below. It has no air injection ports and no carb pre-heat apparatus. It's been lightly ground to smoothen the exterior surface. All 3 studs are in good condition. $60 USD / $80 CAD. [SOLD]
IMG_5421.JPG
IMG_5421.JPG (179.87 KiB) Viewed 1206 times
IMG_5422.JPG
IMG_5422.JPG (111.94 KiB) Viewed 1206 times
IMG_5423.JPG
IMG_5423.JPG (184.66 KiB) Viewed 1206 times

#2 is shown in the last 3 pictures. It has air injection ports and the carb pre-heat stuff. One stud is in good condition, the other 2 are broken. $30 USD / $40 CAD
IMG_5424.JPG
IMG_5424.JPG (187.06 KiB) Viewed 1206 times
IMG_5425.JPG
IMG_5425.JPG (123.56 KiB) Viewed 1206 times
IMG_5426.JPG
IMG_5426.JPG (179.58 KiB) Viewed 1206 times
Last edited by SteveEdmonton on 01 Jun 2019 12:01, edited 1 time in total.
'71 4-door
'74 MGB-GT
'04 Miata
User avatar
MikeY
Posts: 694
Joined: 26 Jun 2003 16:25
Location: Qualicum Van Isle

Re: Exhaust manifolds

Post by MikeY »

Dan will take the early clean manifold.
User avatar
MikeY
Posts: 694
Joined: 26 Jun 2003 16:25
Location: Qualicum Van Isle

Re: Exhaust manifolds

Post by MikeY »

I'm assuming you don't have the 2 into 1 downpipe to go with the manifold. If you do bring it along. I've yet to make one of these but I see that job in my future. They are usually rotten.
User avatar
SteveEdmonton
Supporter
Posts: 580
Joined: 27 Aug 2010 13:20
Location: Edmonton, AB

Re: Exhaust manifolds

Post by SteveEdmonton »

Thanks Mike-- I'll put that manifold on your pile of stuff. :D
Sorry, though, no I don't have a 2-to-1 downpipe.
'71 4-door
'74 MGB-GT
'04 Miata
Post Reply