WTB Release Bearing Holder for 4spd transmission

Post your forsale and wanted ads
Three B's Racing
Supporter
Posts: 1288
Joined: 03 Mar 2009 11:58
Location: New Hampshire

Re: WTB Release Bearing Holder for 4spd transmission

Post by Three B's Racing »

Tesc510 wrote:The clutch kit I bought from rockauto didn't include the collar, and it seemed like the most complete kit. I'll measure the distance Saturday when I have a chance. Thanks for all the help! want to get my dime going again!
Don't forget that the clutch and pressure plate have to be bolted to the flywheel to get the static finget height otherwise you'll be shooting yourself in the foot.
"Lastnight the wife said oh boy when your dead you can't take nothing with you but your soul oh "Think"
- John Lennon
datzenmike
Supporter
Posts: 6080
Joined: 24 May 2006 12:40
Location: Van. Isle.

Re: WTB Release Bearing Holder for 4spd transmission

Post by datzenmike »

You will need a pilot bushing in the end of the crankshaft and the automatic spacer plate between the crank and the flexplate removed before the flywheel goes on.
"Nissan 'shit the bed' when they made these, plain and simple." McShagger510 on flattop SUs
Post Reply