The 510 Realm

still looking for said gauge clusters.

I am looking for SSS instrument cluster. Most likely it would be for RHD car, but my plan it to convert to LHD. So I would probably need two complete gauge clusters with working gauges.

This is picture of RHD gauge cluster. Not my picture, but the internet.

The carb worked fine when removed from the car a couple years ago but will need to be rebuilt. The manifold has a couple air bubble defects in the runners that should to be repaired. No hardware. $300.00 US plus shipping.

there are these top hats/camber plates:
http://www.datsport.com/suspension-fron ... rings.html

PM sent

Your third picture looks like something from a broken mount. Your first two pictures are correct. However, the factory bolts for attaching the center mount to the transmission have a flat side to them and insert from top down so they don't turn when you tighten down the nuts. And the factory nuts ar...

To Three B's and all that know the true meaning of Memorial Day, I apologize if you felt I was scolding you. However, to those that think it is just another holiday and the start of summer, I DID intend it to be a scolding. Memorial Day is a day to remember the soldiers that gave their all in defens...

... is not about BBQ, beer, swimming pools, the beginning of summer, celebrations. It is about remembrance. So at 3pm on Memorial Day, take a minute of silence and remember the fallen.

Get the OEM mounts from here: https://www.nissanpartsdeal.com/parts/nissan-insulator-mount~11220-a3500.html?Make=Nissan&Model=280ZX&Year=1983&Submodel=&Filter=() Item 1 in this picture: Capture.JPG I have also found that the motor mounts for an L20B raise the engine a bit to high for...

Question about lubrication. What is the preferred grease for the plastic gears inside the transmission of these wiper motor assemblies? I have been looking at silicon grease of low viscosity. Any suggestions?

I will be trying an Ermish Racing system in 2.25". With their headers too that has 2.5" collector. We shall see how loud it is or is not. May have to add a resonator if too loud. Or maybe a Thrush glass pack instead of a resonator. Thoughts? Also looking into v-band exhaust pipe connection...

BTT:
Still looking

BTT:
Still looking.

BTT:
Still looking for the front core support.
Even a front clip from the shock towers forward. Rust and damage free.

I found this image of the subject wiring pigtail. SubHarness_Tach_Clock_Connector2[1].jpg Where I found the image mentions it plugs into the Tach/Clock connector which would provide a constant 12v to the tach. I could rewire such to be a switched 12v instead. However, if the turnsignal pigtail would...