The 510 Realm

If you've readjusted that stop for the throttle body's butterfly it changes the voltage at idle on the throttle position sensor (TPS) so you would have to reset that. Check the fast idle cam that it is correctly set cold and hot. This is assuming this is a S14 motor.

Hey Jordan, was wondering if you checked 1-3rd gear end play? I've rebuilt 3 transmissions in the last 28 years (last one was last year) and have always found 1st and 2nd gears to be in spec but have always found 3rd to be a few thou out of spec at the upper level. So what I did was had the spacer b...

Thanks guys!! Will bet the shroud looks amazing when it's finished! And awesome welding going on there. The bearing damage is weird. It's not like it's continuously the whole race. I actually have been on the phone with my bearing engineer for work things but this is a more interesting topic. We di...

Oh and one good idea is to take some 3M red scrub and redress all the synchro cones so they have a nice new finish then attach the synchro and spin it on the cone and make sure it doesn't screw itself to it. If it does, redress the cone more and the mating surface of the synchro until it no longer w...

Trans work is fun!!! its a pony keg job. However, I couldn't help notice your gutter catch by 1st gear is in a very bad position. It carries oil flung off 1st gear back down a gutter to lube the rear driveshafts input and bearing in the tail section. Yours looks like it wouldn't carry much oil back ...

KiKiIchiBan wrote: ↑18 Mar 2021 08:35 Hello there,

Does anyone have any NOS or very good condition door skins for a 2 door they'd sell to me and could facilitate shipping over to Blighty at my expense?

Thank you

There is a set on EBAY if your willing to pay that price.

If you aren't you should be? Let me think for a second,,,,,,,,,,,,,,,,Hehehehehehehe, Hahahahaha! Sounds like you should be so don't lay that on us.

I was merely pointing out that the videos were not simply another opinion like all the previous posts you lumped together, but direct quotes. Using them I did say you could watch them and form your own. (opinion) I didn't tell you what to think only to form an opinion from watching. A lot of that s...

Those videos are not an opinion, but you can watch them and form your own. Or not if you are a Democrat and it makes you uncomfortable. Take the blue pill and watch CNN tell you what to think and what not to know. As or Trump I don't like him much but he gets results and lesser of two evils just li...

Hehehehe! this is awesome reading everyone's opinions thinking their all right when an opinion doesn't mean your right, its an opinion. There's the way it is, and the way it should be. How it should be? I don't know its an opinion and I'm keeping it to myself. Three subjects you should never ever ha...

Early '70s all N American cars started using radial tires. Withing a year or so makers had to add rear sway bars or at least ALL police cars did. At night if a car behind you showed the tell tail shadow of a sway bar from the lights behind him, it was almost always a cop. Next were factory halogen ...

Wow, I didn't think I would forget these numbers, but they are slipping! I do know from personal experience and measuring that the U67 head, with the 47cc chambers (not machined) on the Z22S block nets just under 10:1 C/R. My current Z22S with a shaved U67 head nets 10.5:1. I believe that the close...

Oh Please don't stop, this is very entertaining. I mean opinion doesn't make it right so for me its just words. Best part is the comments on Biden being put out to pasture in a few months I doubt it but then its just my opinion like assholes, everybody's got one. Peace 8>)

I'd pull the rubber boot on the clutch arm and with a good flashlight have a look to make sure that just maybe some how the throw out bearings sleeve didn't fall of the end of the input shafts cover or that piece didn't break somehow.

Found a place locally that specializes in performance alignments and got an apt Friday morning to get the front end done. Gonna shoot for -1.5 camber +5 caster 1/16 toe in. I was up at Weirs Beach last weekend and saw a Red 510 cruising up by past SS Mt. Washington dock my wife shouted out the wind...