The 510 Realm

You can buy a standard relay plug/pigtail at places like CarQuest. They bundle the 4 or 5 wires that go to each relay and keep them from separating. You use standard, unshielded terminals that lock into the square plug. Then it's like a factory harness. it could prevent a major headache.

I've got an 8 gauge wire in there, but with it wired up like I showed in the diagram there is still no power getting to the rest of the car.... so gauges/lights/starter all that crap has nothing going to it.... so what's missing so that I can bring power to the rest of the car, I thought the setup ...

The whole thing comes apart pretty easily. So go ahead and take it apart. You'll learn how simple the design is.

Your setup will work fine. Just make sure the charge wire (the 1 wire to alternator) is properly sized (depends on the output 10 or 8 gauge).

Colbino wrote:
So for shits and giggles, would the above system you posted "was" like what I have, would that be equal do a dizzy?

Huh? I don't understand the question.

http://www.google.com/search?hl=en&q=%22e12-27%22+ignition&aq=f&oq=&aqi= It was used on other makes besides Datsuns. The 4th hit from the above search shows this very good link that includes the wiring info: http://datsun1200.com/modules/mediawiki/index.php?title=B-210_Electronic_Dis...

No one gives up on the idea but the dedicated ones come up with individual solutions that don't apply across to all cars. It would seem the early MR2 manual rack with Cressida tie rods is the closest production rack to fit. It is a tad off on size. On a car with otherwise stock suspension, it would ...

Anyone have his current email addy? I was looking for info on his control arm/rack mod.

If you have some limitations, and your budget is $10k, I strongly suggest you buy a car with the KA swap already done. I've seen them for a low of $5K (of course nicer cars can go for more). Then you could take the balance and fix/update what you need. If you were very handy/experienced $10K would b...

For anyone in the future doing a search, that number does come up as half-twist sockets (for 5/8" hole). Can't verify the application but here is a link with nice pics. https://www.dmauto.com/web/dmauto/Catalog/NAPA_ECAT/mfg/ECH/LS6501/ Also found LS6500 as same but for 1/2" hole. http://w...

I am interested in the dash AC unit. Don't need anything under the hood. Is it in decent shape and would you be willing to box and ship it?

There is no way to have a bolt MADE.. i would need like a stepped bolt..

You certainly can have bolts made. Any good machinist can do it. The issue is the proper hardening and that's where the money adds up.

qwik510 wrote:

5TINGUY wrote:It is hard to make an offer without seeing it. A new bumper is like $500.

Where can you find one?

There's one on Ebay now.

icehouse wrote:I wonder how much for a crate?

Don't remember the crate fee (maybe $50) but total price delivered to my shop in Virginia was $285 if I remember right.

Looks like 12mm = /- with washers. Is it cool to run a dime with the front tires sticking out past the fender? I test fit a +40 15x7 that will be flush with the fender and clear the cailper. A whole set would cost me 300 using my tires. I know, more than spacers and studs but less hassle. I should ...