The 510 Realm

Scott - do you have any more pictures of this?
Thanks

We are using a GoPro HD camera, for the rear facing camera we used a suction mount ot the roof and we made a metal version of the GoPro mount an bolted it right to the front bumper.If you look closley to the pic you can see the camera on the bumper. The tires are the Lassa rally 3 tires from http://...

Hello! Here are some of our videos from the Lake Superior Performance Rally in Houghton, MI http://i217.photobucket.com/albums/cc223/Cscray94/33751_484225749743_503279743_6875761_4546375_n.jpg We have a mix of in-car, bumper, an rear-facing camera angles Enjoy! http://www.youtube.com/user/Cscray94?f...

So after looking into this more an more, we bought another r180 that was different from the two that we had. We put all the diffs that we have onto the bench, one r160, one r180 an the one that we are looking for parts for, we started comparing them to each other an started measuring the ring gears,...

The clip in flanges can be replaced by the bolt in type. You just need to remove the bolt plugs from the sun gears in a spare diff & fit these to the sun gears in the clip in diff. No need to reset the diff as long as you mark all positions & keep the shims in the correct place. I am a bit ...

Well I was curious if anyone has any info on what year, or any other info on this diff, were having some trouble finding them..
Thanks!

thisismatt wrote:You misplaced the entire flange or just the clip?

The whole flange..

defdes wrote:I wasn't personal, there was a glitch in the system and a lot of info was lost.

Ok thanks! I was just a little curious..

So I posted this question yesterday but It was removed, not really sure why, so I will post it again. We have the a r180 Diff with the c-clip flanges, not bolt ones, an are using stock 510 axles. At one of our rallies last year one of the C-clips failed an took out the bearing on the same side. Then...

I live in Green Bay, Wi 54313.. You could just stick it into a flat rate box, just an idea..
Thanks

Would you be willing to sell just the latch out of the door?

I am talking about the crossmember its self. We bent the one that we have on the car a bit from hitting a big rock. I guess my other thought is that the crossmember that we have has been slotted to gain more adjustment, as well as enlarging the exhaust opening. SO If we would build one from scrach w...

So I have been tossing the idea of making a tubular type rear cross-member for our rally 510, an was curious in anyone else has done this or has any pictures of one that has been done. I have searched this site as well as a bit of googeling but no avail. My main reasoning for wanting to do this is t...

Both trans are sold..
An we also have another a87 head for sale.. open to any offers
Thanks again!

Benzo wrote:would you take 60.00 for the zx trans and what is condition and how much is shipping to 94109 san francisco?

thanks

Benzo

Pm sent.. Anyone else with any interest?